Cable Keeper™

$152.00$252.00

The Cable Keeper was designed to fit into most Airwall tracks for the purpose of keeping lightweight cable inside tracks and out of site.

Sold in 50 and 100 pcs. count.

Dimensions: 2-5/8″ x 1-7/8″

Each run of cable to be held in track must start and end with a Titan Airwall hanger properly installed to cable.

See Installation Instructions below.

SKU: Cable-Keeper Categories: ,

Description

CABLE KEEPER™ Installation Instructions – 8/1/19

The Cable Keeper was designed to fit into most Airwall tracks for the purpose of keeping lightweight cable inside tracks and out of site.

Dimensions: 2-5/8″ x 1-7/8″

Each run of cable to be held in track must start and end with a Titan Airwall hanger properly installed to cable.

  • Install Titan Airwall hangers at the start and end of the cable run – The cable will run over the top of the hanger in the track and be secured to the eyebolt attached to the Titan Airwall Hanger.
  • As the cable is placed into the track, install a Cable Keeper in the track underneath the cable to support the cable in the track.
  • The Cable Keeper is angled in and laid flat on the interior of track.
  • The cable should always rest inside the track on top of the Cable Keeper.
  • Along the cable run in the track, properly install a Titan Airwall Hanger at intervals of double the ceiling height to the floor [i.e. Every 20 feet for 10 foot ceiling])
  • Installer should follow this procedure along the length of the cable run installing Cable Keeper every 24” inches on center & Titan Airwall hangers should be installed at intervals described above
  • Do not install in soffits
  • Do not exceed cable weight of Two (2) lbs per linear foot. Not designed for heavy cables.

Additional information

Weight 6 oz
Dimensions 8 × 6 × 4 in
Count

50, 100

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Title

Go to Top